IDK SWC-2000, Руководство пользователя, Страница: 15 / 32

SWC-2000 Command Guide
15
3.2.3 Setting RS-232C communication
@GCT / @SCT RS-232C communication
Function Getting Setting
Format
@GCT @SCT, port, setting
Return value
@GCT, setting @SCT, port, setting
Parameter setting: Communication setting
- Baud rate (4800, 9600, 19200, 38400 [bps] [Default] 9600)
- Data bit length (8, 7 [bit] [Default] 8)
- Parity check (NONE, EVEN, ODD [Default] NONE)
- Stop bit (1, 2 [bit] [Default] 1)
For setting values, see the [Table 3.1] .
port: RS-232C connector
0 or 1 = RS-232C connector
Example
@GCT
@GCT,24
Getting communication settings of
RS-232Cs
- Baud rate
: 19200 [bps]
- Data bit length : 8 [bit]
- Parity check
: NONE
- Stop bit : 1 [bit]
@SCT,1,24
@SCT,1,24
Setting communication settings of
RS-232Cs as follows:
- Baud rate
: 19200 [bps]
- Data bit length : 8 [bit]
- Parity check
: NONE
- Stop bit : 1 [bit]
Completed
Remarks If IP address or RS-232C communication setting is changed, the communication may
be disabled. Change the environmental settings based on the SWC settings.
[Table 3.1] Parameter of RS-232C communication settings
Value Communication Value Communication Value Communication Value Communication
0 4800 8 NONE 1 12 9600 8 NONE 1 24 19200 8 NONE 1 36 38400 8 NONE 1
1 4800 8 NONE 2 13 9600 8 NONE 2 25 19200 8 NONE 2 37 38400 8 NONE 2
2 4800 8 ODD 1 14 9600 8 ODD 1 26 19200 8 ODD 1 38 38400 8 ODD 1
3 4800 8 ODD 2 15 9600 8 ODD 2 27 19200 8 ODD 2 39 38400 8 ODD 2
4 4800 8 EVEN 1 16 9600 8 EVEN 1 28 19200 8 EVEN 1 40 38400 8 EVEN 1
5 4800 8 EVEN 2 17 9600 8 EVEN 2 29 19200 8 EVEN 2 41 38400 8 EVEN 2
6 4800 7 NONE 1 18 9600 7 NONE 1 30 19200 7 NONE 1 42 38400 7 NONE 1
7 4800 7 NONE 2 19 9600 7 NONE 2 31 19200 7 NONE 2 43 38400 7 NONE 2
8 4800 7 ODD 1 20 9600 7 ODD 1 32 19200 7 ODD 1 44 38400 7 ODD 1
9 4800 7 ODD 2 21 9600 7 ODD 2 33 19200 7 ODD 2 45 38400 7 ODD 2
10 4800 7 EVEN 1 22 9600 7 EVEN 1 34 19200 7 EVEN 1 46 38400 7 EVEN 1
11 4800 7 EVEN 2 23 9600 7 EVEN 2 35 19200 7 EVEN 2 47 38400 7 EVEN 2