IDK NJR-R04HD, Руководство пользователя

Страница: 54 / 94

NJR-T04HD / NJR-R04HD User’s Guide
54
10.2.10 Test pattern
You can activate the NJR’s internal test pattern generator and direct its signal to each output port.
All settings of “ 10.3 Quality setting ” will be invalid while a test pattern is displayed.
For “OUTPUT FRAME”: use this pattern if edges are cut off due to enlargement display on the sink device.
Settings of “ 10.2.5 Display position ” and “ 10.2.6 Setting display size ” in the output side will be adjusted in
order to display the test pattern on full screen.
For test patterns other than “OUTPUT FRAME”: video is output on full screen with the resolution set in “ 10.2.1
Output resolution ” and the settings of “ 10.2.5 Display position ”, “ 10.2.6 Setting display size ” and “ 10.2.7
Masking ”, will be invalid.
You can scroll through the available patterns “COLOR BAR,””GRAY SCALE,””RAMP,” and ”ZEBRA”. The
scroll speed can be set by 3 pixels per frame up to 30 pixels per frame.
You can check the residual image (resolution of moving picture) by displaying and scrolling the “ZEBRA”
pattern.
VERTICAL RAMP
50% WHITE
RASTER
V-COLOR BAR V-GRAY SCALE
RED RASTER GREEN RASTER BLUE RASTER 100% WHITE
RASTER
CROSS HATCH OUTPUT FRAME VERTICAL
STRIPE
HORIZONTAL
STRIPE
VERTICAL
ZEBRA
H-COLOR BAR H-GRAY SCALE
HORIZONTAL
RAMP
HORIZONTAL
ZEBRA
OFF Default
(Regular video output
）
[Fig. 10.3] Test pattern
Setting for
NJR-T04HD: If “ 10.5.7 Video type ” is set to “ All Inputs”, @STP communication command cannot be used.
NJR-R04HD: For each HDMI output connector
Setting value
[Fig. 10.3] Test pattern
Communication command
@STP Setting test pattern
@GTP Getting test pattern
NJR-T04HD / NJR-R04HD