MSD-62 Series User’s Guide
138
9.16.5 Display position
Menu Top
→
BITMAP
→
POSITION
Setting for Each output channel, each bitmap
Setting value
You can set the display position of the bitmap.
●
CENTER
[Default]
●
TOP-LEFT
●
BOTTOM-LEFT
●
TOP-RIGHT
●
BOTTOM-RIGHT
[Fig. 9.32] Position
9.16.6 Assigning input channel
Menu Top
→
BITMAP
→
CHANNEL ASSIGN
Setting for Each input channel, Each output channel
Setting value
OFF [Default], ON (BITMAP1 ON to BITMAP4 ON)
A bitmap can be treated as an input video source by assigning the bitmap to any input that is not currently
being used. Set “
9.16.2 Outputting bitmap image
” to “OFF” in order to assign the bitmap to an input
channel.
If multiple bitmaps are registered, select the bitmap number to be output.
If you switch an input video to a bitmap image, it takes longer time to output the image, and you cannot
perform other operations until the bitmap is displayed.
Press the MENU/SET key to apply the setting.
9.16.7 Startup bitmap output
Menu Top
→
BITMAP
→
POWER ON BITMAP
Setting for Each output channel
Setting value
OFF [Default], ON (BITMAP1 ON to BITMAP4 ON)
You can enable/disable the bitmap output at startup.