MSD-501/502/701/702 User
’s Guide
44
7.6.7 Priority of DVI input channel automatic switching
Menu Top screen
→
INPUT SETTING
→
AUTO SWITCHING
Setting for Each input and output (common to OUTA and OUTB)
Setting value
Item
Set value
Default
Output channel (OUT)
1, 2
1
Input channel (IN)
1 to 7
1
Priority (PRI)
1 (high) to 7 (low), OFF
OFF
When the input signal is changed from OFF to ON, channels can automatically be switched according to the
priority based on the current input channel. Video and audio are switched simultaneously regardless of the
channel switching mode setting.
Input channels whose setting is
“OFF” are not switched automatically. Select a value other than “OFF” for
priority (
‘PRI”) in order to enable the function.
Make sure to press the
“MENU/SET” key to apply the settings; otherwise, they are not changed.
7.6.8 Masking time after automatic switching of input channel
Menu Top screen
→
INPUT SETTING
→
AUTO SWITCHING MASK
Setting for Each output (common to OUTA and OUTB)
Setting value 0s000ms to 999s999ms [Default: 0s000 ms]
Set the time from when input channel is switched automatically until when the next automatic switching is
performed.
The automatic switching is not performed during the set time.
【
See:
7.6.7 Priority of DVI input channel automatic switching
