IDK MSD-402, Руководство пользователя

Страница: 76 / 120

MSD-402 User’s Guide
76
8.10.4 Deep Color
Menu EDID
→
DEEP COLOR INPUT
Setting for Each input channel
Setting value 24-BIT COLOR [Default], 30-BIT COLOR
You can set the color depth to be output from the source device.
This menu is valid only if you select “INTERNAL EDID” for “ 8.10.1 EDID ” and you select a resolution other
than “UNUSED” for “ 8.10.3 Input resolution for AV devices ”.
If you select “30-BIT COLOR”, compared to “24-BIT COLOR”, “30-BIT COLOR” is transmitted using a higher
clock frequency, which may cause noise if a cable with a bad quality or a long cable is connected. In such a
case, the noise may be removed by setting the color to “24-BIT COLOR”.
Click the “SET” button to open the dialog box and click the “OK” button to renew the EDID settings.
8.10.5 Audio format
Menu EDID
→
AUDIO FORMAT
Setting for Each input channel
Setting value [Table 8.14] Audio format
[Table 8.14] Audio format
Audio format
ON / OFF
Maximum sampling frequency (kHz)
PCM
Cannot be set
32 / 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (48)
Dolby Digital Can be set (OFF) ON: 32 / 44.1 / 48 (48)
AAC
Can be set (OFF)
ON: 32 / 44.1 / 48 / 88.2 / 96 (48)
Dolby Can be set (OFF) ON: 32 / 44.1 / 48 (48)
DTS Can be set (OFF) ON: 32 / 44.1 / 48 / 96 (48)
DTS-HD Can be set (OFF) ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (192)
Dolby TrueHD Can be set (OFF) ON: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 (96)
Default values are shown in parentheses.
You can set the audio format and maximum sampling frequency that are output from a source device.
This menu will be valid only if you select “INTERNAL EDID” for “ 8.10.1 EDID ” and you select a resolution
other than “UNUSED” for “ 8.10.3 Input resolution for AV devices ”.
Click the “SET” button to open the dialog box and click the “OK” button to renew the EDID settings.