HDC-TH100-D / HDC-RH100-D User’s Guide
25
7.2 Product specification
Item
HDC-TH100-D (Transmitter)
HDC-RH100-D (Receiver)
Input
1 input
HDMI (*1) / DVI 1.0
TMDS signal link
HDCP 1.4 / 2.2 (Pass through) (*2)
CEC (Pass through)
Connector: Female HDMI Type A (19-pin) (*3)
1 input
HDBaseT
Connector: RJ-45
Output
1 output
HDBaseT
Connector: RJ-45
1 output
HDMI (*1) / DVI 1.0
TMDS signal link
HDCP 1.4 / 2.2 (Pass through) (*2)
CEC (Pass through)
Connector: Female HDMI Type A (19-pin) (*3)
Format
VGA to 4K (*4)
480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
Color depth
24 bit, 30 bit, 36 bit Deep Color (*5)
Dot clock
25 MHz to 600 MHz
TMDS clock
25 MHz to 340 MHz
TMDS data rate
0.75 Gbps to 10.2 Gbps
Plug & Play
Pass through
Digital audio input / output
Multi-channel linear PCM up to 8 channels
Sampling frequency: 32 kHz to 192 kHz, Sample size: 16 bit to 24 bit
Cable for
extension
Cable (*6)
CAT.5E HDC, Cat5e UTP / STP, Cat6 UTP / STP cable
Maximum
extension distance (*7)
328 ft. (100 m) (For 4K format, CAT.5E HDC,
Cat5e STP, or Cat6 STP cable is used)
492 ft. (150 m) (Long reach mode is used)
External
control
RS-232C
1 port / male D-sub (9 pin), full duplex, up to 115.2 kbps
LAN
1 port / RJ-45 10Base-T / 100Base-TX (Auto Negotiation), Auto MDI / MDI-X
General
AC Adapter
Input: 100 - 240 VAC
±
10%, 50 Hz / 60 Hz
±
3 Hz
Output: DC 5 V 2 A (AC adapter is supplied)
Power consumption
About 4 Watts
About 7 Watts
Dimensions
4.2 (W) × 1.1 (H) × 3.9 (D)” (106 (W) × 27.5 (H) × 100 (D) mm)
(EIA quarter rack wide) (Excluding connectors and the like)
Weight
0.4 lbs. (0.2 kg)
Temperature
Operating: 32°F to 104°F (0°C to +40°C)
Storage: -4°F to +176°F (-20°C to +80°C)
Humidity
Operating / Storage: 20% to 90% (Non Condensing)
*1
HEC and ARC are not supported.
*2
DVI signals protected by HDCP are not supported.
To transmit those signals, use an IDK’s twisted pair cable extender supporting DVI signals.
*3
Use 16 ft. (5 m) or shorter HDMI cables.
For 4K format, use an 18-Gbps high speed cable.
*4
For 4K format, 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:2:0) / 59.94 Hz (4:2:0) / 60 Hz (4:2:0) are supported.
*5
For 4K format, the following color depths are supported.
・
24 Hz / 25 Hz / 30 Hz: 4 bit (RGB, YCbCr 4:4:4)
: 24 bit, 30 bit, 36 bit (YCbCr 4:2:2)
・
50 Hz / 59.94 Hz / 60 Hz: 24 bit (YCbCr 4:2:0)
*6
T568A or T568B straight. The CAT.5E HDC cable is developed by IDK and recommended by HDBaseT alliance.
*7
The maximum extension distance was obtained when IDK’s CAT.5E HDC cable was used. The distance may not be extended with some device combinations, cabling method,
or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above. Operations may not be stable with some
LCD devices; please check the operation beforehand or contact us.
The maximum extension distance is the shorter distance of connected HDBaseT product or sink device’s maximum extension distance.
For Long reach mode, use IDK’s twisted pair cable products that supports 328 ft. (100 m), and up to resolutions 1080p (24 bit) or less are supported.
