IDK HDC-RH221UHD, Справочник по командам

Страница: 26 / 63

HDC-UHD Series Command Guide
26
3.3.6 Setting EDID
@GED / @SED Resolution
Getting Command @GED
Response @GED, format_1, format_2
Setting Command @SED, in_1, format_1 (, in_2, format_2)
Response @SED, in_1, format_1 (, in_2, format_2)
Parameter format_1-2: EDID resolution
1 = External EDID, 2 = Copied EDID,
3 = 1080p (59.94/60), 4 = 720p,
5 = 1080i, 6 = SVGA (800×600),
7 = XGA (1024×768), 8 = VESA720 (1280×720),
9 = WXGA (1280×768), 10 = WXGA (1280×800),
11 = Quad-VGA (1280×960), 12 = SXGA (1280×1024),
13 = WXGA (1360×768), 14 = WXGA (1366×768),
15 = SXGA+ (1400×1050), 16 = WXGA+ (1440×900),
17 = WXGA++ (1600×900) , 18 = UXGA (1600×1200),
19 = WSXGA+ (1680×1050), 20 = VESA1080 (1920×1080),
21 = WUXGA (1920×1200), 22 = QWXGA (2048×1152),
23 = WQHD (2560×1440), 24 = WQXGA (2560×1600),
41 = 2160p (24/25/30),
42 = 2160p (50/59.94/60, 4:2:0) [Default] (HDBaseT input connector),
43 = 2160p (50/59.94/60, 4:4:4) [Default] (HDMI input connector),
44 = 4096×2160 (24/25/30),
45 = 4096×2160 (50/59.94/60, 4:2:0),
46 = 4096×2160 (50/59.94/60, 4:4:4)
in_1-2: Input channel
0 = All inputs, 1 = IN1, 2 = IN2
Getting
example Command
Response
@GED
@GED,3,3
Description Getting the EDID resolution
All input channels: 1080p (59.94/60)
Setting
example Command
Response
@SED,0,1
@SED,0,1
Description Setting the EDID resolution of all input channels to External EDID
Completed
Remarks If selecting “1” (External EDID) or “2” (Copied EDID), execute “ @SEC External
EDID ” or “ @RME Copying EDID ” beforehand, respectively.