HDC-UHD Series Command Guide
20
@GIA / @SIA
HDBaseT input long reach mode
Getting
Command @GIA
Response @GIA,mode_2
Setting
Command @SIA, in_2, mode_2
Response @SIA, in_2, mode_2
Parameter
mode_2: Long reach mode
0 =OFF [Default], 1 = ON
in_2: HDBaseT input channel
2 = IN2 [Fixed]
Getting
example
Command
Response
@GIA
@GIA,0
Description Getting the HDBaseT input long reach mode
IN2: OFF
Setting
example
Command
Response
@SIA,2,0
@SIA,2,0
Description Setting the long reach mode of IN2 to OFF
Completed
Remarks
If this menu is set to “ON”, resolutions up to 1080p (24 bit) or dot clock 148 MHz
are supported. If it exceeds 1080p (24 bit) or 148 MHz, signals cannot be
received.
