IDK FDX-S Series, Руководство пользователя

Страница: 52 / 117

FDX-S Series User Guide
52
10.3.2 Aspect ratio for sink device
Menu Top
→
OUTPUT IMAGE
→
ASPECT RATIO
Setting for OUT01 to OUTn
Setting value
・
RESOLUTION* [Default]
・
16:10
・
16:9
・
5:3
・
5:4
・
4:3
* If you select
“RESOLUTION”, the aspect ratio of the output resolution will be applied. If aspect ratios of the
target sink device and the output resolution are different from each other, you can select one of the
following aspect ratios for the sink device:
“4:3”, “5:4”, “5:3”, “16:9”, and “16:10”.
10.3.3 Image position
Menu Top
→
OUTPUT IMAGE
→
IMAGE POSITION
Setting for OUT01 to OUTn
Setting value Horizontal position : -2100.0% to 2100.0% [by 0.1%] [Default] 0.0%
Vertical position : -2100.0% to 2100.0% [by 0.1%] [Default] 0.0%
The image position is based on the output resolution (100%), and it starts from the upper left quadrant.
Image size should be kept bigger than image position. The image position is set within the range
automatically if the set image position is bigger than the set image size.
【
See: 10.3.4 Image size
】
10.3.4 Image size
Menu Top
→
OUTPUT IMAGE
→
IMAGE SIZE
Setting for OUT01 to OUTn
Setting value Horizontal size : 20.0% to 2100.0% [by 0.1%] [Default] 100.0%
Vertical size : 20.0% to 2100.0% [by 0.1%] [Default] 100.0%
The video size is scaled based on the output resolution (100%), and it starts from the set image position.
【
See: 10.3.3 Image position
】
Scan conversion output only
Scan conversion output only
Scan conversion output only