IDK FDX-16, Справочник по командам

Страница: 26 / 52

FDX-16 Command Guide
26
2.5.4 Output setting
@GEQ / @SEQ Output equalizer
Function Getting Setting
Format @GEQ @SEQ,out_1,level_1 (,out_2,level_2
･･･
)
Return value @GEQ,level_1,
･･･
level_16 @SEQ,out_1,level_1 (,out_2,level_2
･･･
)
Parameter out_1 to out_16: Output channel
0 = All outputs, 1 to 16 = OUTPUT1 to OUTPUT16
level_1 to level_16 : Output equalizer of each output channel
0 = OFF [Default], 1 = LOW, 2 = MEDIUM, 3 = HIGH,
- 2 = Digital output slot board is not mounted.
Example @GEQ
@GEQ,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Getting output equalizer status.
All output channels: OFF
@SEQ,0,0
@SEQ,0,0
Setting output equalizers of all output
channels to OFF.
Completed normally.
Remarks
－
@GDM / @SDM Output mode
Function Getting Setting
Format @GDM @SDM,out_1,mode_1 (,out_2,mode_
2
･･･
)
Return value @GDM,mode_1,
･･･
mode_16 @SDM,out_1,mode_1 (,out_2,mode_
2
･･･
)
Parameter out_1 to out_16: Output channel
0 = All outputs, 1 to 16 = OUTPUT1 to OUTPUT16
mode_1 to mode_16 : Output mode of output channel
0 = AUTO MODE [Default], 1 = DVI MODE,
2 = HDMI YCbCr 4:4:4 MODE, 3 = HDMI YCbCr 4:2:2 MODE,
4 = HDMI RGB MODE, - 2 = Output slot board is not mounted.
Example @GDM
@GDM,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
Getting output modes.
All output channels: AUTO MODE
@SDM,0,0
@SDM,0,0
Setting output mode of all output channels
to AUTO MODE.
Completed normally.
Remarks
－