Part 2 - Configuration
40
•
Line Delimiter: Designate a string to mark the end of
a line. You can enter control strings by selecting
and then entering ^, followed by a letter. For example,
Carriage Return is ^M and Line Feed (new line) is ^J.
•
Ignore String: Specify a string to ignore from
transaction records.
•
Case Sensitive: Ignores case in strings designated
under Transaction Start, Transaction End, Line
Delimiter, and Ignore String.
Case Sensitive does not apply to control strings.
•
Time Out: Once Time Out has been enabled, the
system will assume the end of a transaction if no new
string is entered within the specified duration of time.
Select between 5 secs and 15 mins.
Selecting RS-232, RS-485, USB-Serial 1 through 8, or LAN
1 through 4 as the port activates the Port Setup button.
Select Setup and configure the Baud Rate, Data Bit,
Stop Bit, and Parity settings.
•
If any one of LAN1 through 4 has been selected as
the port, select the Port Setup button and configure
the network port setting.
•
If using a USB-serial port, the Text-In feature may
malfunction if the USB cable is removed while the
system is in operation.
•
Title: Designate a name for the text-in device.
•
Actions: Specify which actions to take when text-in is
detected.
– Record: Specify which cameras to begin linked
recording on when an event occurs. If the schedule
is set to Event or Time & Event mode, the selected
cameras will begin linked recording when an event
occurs.
– Alarm-Out: Designate event-triggered alarm-out
channels and beeps.
– Notify: Configure to be notified of events by Mail,
LAN1 through 5, FTP, Push, and/or Alert Window.
– PTZ: Moves the PTZ camera to a specific preset
position when an event occurs.
In order to use the Callback feature, the DVR must be
registered on the remote program.
Camera Setup
Refer to the Menu Use on page 20 for basic
information on using the Setup menus.
General
Enable/disable the covert view and rename cameras.
•
No.: Turn the camera number On or Off.
•
Title: Edit the camera’s name.
•
Use: Set the camera as Normal, Covert 1, or Covert 2.
Live images and video recordings from cameras that
have been set as Covert 1 or Covert 2 will not be
available to users who do not have covert camera
access. Setting a camera as Covert 1 hides its images
but does display OSD information about the camera.
Setting a camera as Covert 2 hides its images as well
as OSD information about the camera as if it has been
deactivated completely.
•
Type: Select the type supported by the camera
among Auto, SD, HD-TVI and AHD. Selecting Auto
allows the DVR to automatically detect the type
supported by the camera.
•
Mode: Select the width resolution supported by
the camera among Auto, 720, 960, HD and Full HD.
Selecting Auto allows the DVR to automatically detect
the width resolution supported by the camera.
•
When selecting Auto, the 720, HD and Full HD
mode are supported. The input resolution is
applied without rebooting the system. If the
camera’s width resolution is 960 and Mode is set
to Auto, 720 mode will be applied.
•
When you change mode, the system restarts
automatically.
