Idis DR-8364, Быстрое руководство

Страница: 9 / 35

9
● LAN Setup
This test must be
performed before
proceeding to the next
step.
● FEN Setup
Enter the NVR name
registered on the FEN
server in the
Device
Name field, and click
the Check to check its
availability.
● Finish the Network Setup Wizard
Camera Registration
Once Network Setup Wizard is complete, live mode screen
appears. While in live mode, right-click on the mouse and
select Camera Registration to run the Camera Registration
mode. It allows you to scan for the cameras connected to
the NVR.
1
3
4
2
5
1
Camera Scan Button
2
Camera View
Buttons
3
Camera List Area
4
Video Display Area
5
Apply/Cancel
Buttons
Camera Scan Button
Use this button to scan for and register cameras.
Pressing the
Scan
button displays the following submenu:
● Rescan : Scan for DirectIP™ cameras that were not
scanned automatically.
● Go To Camera
: Moves the focus automatically to the
camera using MAC address of camera in the camera list.
● Search Scope
: Assigns the detected cameras on the
video display area.
● Screen Auto. Assign
: Assigns the detected cameras on
the video display area.
●
Camera list : By using the camera information file, .csv,
the user can register the cameras easily.
● Scan Refresh Interval: Configures the refesh interval
to scan the camera. If the interval is short, camera scan
results are refreshed more frequently. However, if the
interval is long, it is advantageous to scan cameras on a
wide network.
● Third Party Scan
: Used to manually scan for third-party
cameras that cannot be recognized by the auto scan
feature.
- Protocol: Select the protocol used by the camera (or
video encoder) you wish to search for.
Even if the network device uses a protocol
supported by the NVR, the device itself may not
be visible for scanning and registration by the
NVR. For more information about supported
network devices and models, contact your
retailer.