Part 1 – Introduction
12
Rear Panel Connections
Monitor Connection
Connect to the
VGA OUT
or
HDMI
port.
Network Connection
This NVR is capable of connecting to networks via an
ethernet connector. Connect an RJ-45 cable (Cat5,
Cat5e, or Cat6) to the NVR's network port. It's possible to
operate and upgrade the NVR remotely over a network.
Fore more information on ethernet connection setup,
refer to
Network Setup in the operation manual
.
Green LED on the right will begin to turn on if
connected a 100Mbps network. Also, orange LED on
the left will begin to turn on if connected a 10Mbps
network. Orange LED on the left will then flash once a
link has been established.
Video Connection
•
Video In/PoE Port
Connect network cameras or video encoders to the
NVR using RJ-45 cable (Cat5, Cat5e, or Cat6). The NVR
recognizes DirectIP™ network cameras automatically.
•
Green LED on the right will turn on when PoE comes
on line. Orange LED on the left will then flash once a
link has been established.
