Part 1 - Remote Setup
31
Heatmap
Select
Heatmap
to show and analyze the movement
frequency. This function can be used only when
Video
> Streaming > Display Type
is original. If SD video is
recorded, the recording will stop and the SD memory
card will be formatted.
•
Cool down:
Indicate on the screen the heatmap
information recorded during the selected time.
•
Record duration:
Set the recording interval to save
the Heatmap data in the SD memory card.
•
Use Ignoring Time:
Define the heatmap ignoring
time. Heatmap information is not updated on the
screen and heatmap data is not recorded during the
defined time range.
•
Event Action
:
Select a heatmap event action.
-
Record
: Select this option to heatmap data in the
SD memory card.
Alarm In
Select
Alarm In
to enable alarm in event. With alarm
in event enabled, alarm in detections by the alarm in
connector will be assumed as events.
•
Title
:
Enter the alarm-in device’s name.
•
Type
:
Select the alarm in type.
•
Event Action
:
Select an alarm in event alert action.
-
Alarm Out
:
Select if you wish to generate an alarm
out.
-
Send Email:
Select if you wish to send an email.
Select the
Image Attachment
option to attach a
.jpg image of the event detected to the email.
-
Remote Callback:
Select this option to send a
message to a remote system and then select which
system to send the message to.
•
Not supported from the IDIS Web program.
•
The camera must be registered to the remote
system in order to use the
Remote Callback
feature.
-
Audio Alarm:
Select this option to generate an
audio alert and then choose an audio file (.wav,
mp3).
-
FTP Upload
: Select this option if you wish to
upload images to the FTP server.
-
Record
: Select this option to record video.
Event Action
settings must be configured correctly in
order to perform event actions.
