Idis DC-V4212XJ, Быстрое руководство

Страница: 6 / 12

6
4
Check the location of the arrow as shown below.
And assemble the camera to the bracket so that
the arrow is located upwards. Fix the camera using
left and right screws and connect the cable.
• The area with the arrow corresponds to the top
part of the image.
• The cable may be disconnected due to its
weight. Please make sure to fix the cable
tightly on to a certain area in order not to be
disconnected.
5
Fix the main unit to a wall or ceiling using screws.
6
Connect the main unit with the cable of the
camera module.
7
Connect external devices, the network, and the power
adapter.
8
Connect the power.
When installed to other spaces
1
Disassemble the screws on the left and right side
to take apart the camera bracket.
2
Fix the bracket to a wall or ceiling using double-sided
tape or screws.
When attaching the bracket, remove dust or oil and
moisture from the installation surface and apply
sufficient pressure to ensure that the applied face
completely makes contact with the installation
surface.
3
Assemble the camera to the bracket by turing it to the
desired direction. Fix the camera using left and right
screws and connect cable.
• The area with the arrow corresponds to the top
part of the image.
• The cable may be disconnected due to its
weight. Please make sure to fix the cable
tightly on to a certain area in order not to be
disconnected.