Part 1 – Introduction
12
Factory Reset
This will only be performed remotely on the rare
occasions that you want to return all settings to the
original factory settings. Refer to the
IDIS Discovery
operation manual
for details on remote factory
resetting.
A factory reset will clear all camera settings configured
by the user.
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective
installation
manuals
.
Product color and design may vary depending on the
model.
Installation
•
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
•
Install the camera in a shaded area. If the camera is
installed in direct sunlight, it may affect adversely.
1
Screw the camera sun shield to the camera using the
screw and rubber provided with the camera.
2
Screw the mounting bracket to the wall or ceiling by
using screws provided with the camera.
3
Screw the bottom cover to the mounting bracket by
using screws provided with the camera.
4
Adjust the camera angle by bending the stand.
5
Connect external devices, network and power adapter.
6
Apply power.
Dimensions
181.9mm (7.16”)
140mm (5.51”)
321.9mm (12.67”)
Ø 73.5mm (2.89”)
90mm (3.54”)
90mm (3.54”)
Ø 73.5mm (2.89”)
