Idis DC-S6481HRA Скачать руководство пользователя страница 7

7

 

DirectIP NVR makes it easy to use cameras without extra network configurations.
Each camera can be controlled via the DirectIP® NVR setup menu, without any PC.

 - For detailed camera settings, please see the camera setting pages of DirectIP® NVR manual.

 

To use your camera with non-DirectIP system (e.g. other NVR or VMS), refer to the camera 

manual and it can be downloaded from our website: www.idisglobal.com.

Specifications

External Dimensions (Ø x H)

9.52” x 15.79” (242mm x 401mm)

Weight (Main Unit)

15.87 lbs. (7.2kg)

Working Temperature*

IR LED OFF: -40°C ~ +60°C (-40°F ~ +140°F)
IR LED ON: -40°C ~ +40°C (-40°F ~ +104°F)

Starting Temperature*

IR LED OFF: -20°C ~ +60°C (-4°F ~ +140°F)
IR LED ON: -20°C ~ +40°C (-4°F ~ +104°F)

Operating Humidity

0% ~ 90%

Power

24VAC, PoE (IEEE 802.3bt, Class 8)

Input  Power Source

ADAPTER (INPUT : 220V~, 60Hz, 0.6A, OUTPUT : 24V~, 4.5A)

Power Consumption

HEATER OFF, IR LED OFF: 24V~, 1.5A, 27.1W, PoE, IEEE 802.3bt(Class 8), 26.4W
HEATER ON, IR LED ON: 24V~, 2.8A, 52.9W, PoE, IEEE 802.3bt(Class 8), 54.2W

Edge Storage** (Optional) 

(micro SD/SDHC/SDXC memory card, Smart Failover (class 6 or 

higher, max. 512GB))

Certifications

FCC, CE

* It may not operate normally in an environment where the ambient temperature is below -40°C(-40°F).

* If the product is left unattended in an environment where the ambient temperature is below -20°C(-4°F) and the power is 
turned on, it will boot after internal heating for 5 minutes for normal operation.

* In a -40°C(-40°F) environment, the product may not defrost depending on the installation location.

** An SLC (Single Level Cell) or MLC (Multi Level Cell) card by SanDisk or Transcend is recommended to ensure stable 
recording performance.

** An SD memory card is a consumable product with a finite service life. Prolonged use will damage the card’s 
memory sectors and result in data loss or memory card failure. Test the SD memory card regularly and replace it 
whenever necessary.

** microSD Logo is a trademark of SD-3C, LLC.

V1.0

Содержание DC-S6481HRA













Отзывы: