Part 2 - IDIS Web
48
@
Zoom in or out on the video.
#
Adjust image brightness.
$
Apply image filters (Sharpen, Blur, Equalizer, Interpolation, and Revert) to the images.
Image calibration is applied only during the paused state.
%
Use the calendar to search for video recordings by specific dates.
Dates containing video recordings are highlighted in light blue. Selecting a date containing video
recording data loads the earliest recording from that date. Selected date is highlighted in orange.
^
Select
TYPE 1
to enable time lapse search mode and search/playback video recordings in
chronological order. In time lapse search mode, video recordings can be searched by selecting specific
dates on the calendar. Time information of video recordings found on the selected dates is shown on
the time table at the bottom of the screen. Select a point in time to display video from that moment. If
multiple recordings are available for the selected point in time, you can select the desired segment.
&
Select
TYPE 1
to enable event search mode and search for events matching user-designated
parameters.
*
Use the playback controls to play back video.
TYPE 1
Go to First
TYPE 1
Fast Forward
TYPE 1
Play by Frame (backwards)
TYPE 1
Play by Frame (forwards)
TYPE 1
Rewind
TYPE 1
Go to Last
TYPE 1
Play/Pause
(
Click
TYPE 1
to designate recent recordings you wish to search and then jump to a specific point in
the recording.
)
Click
TYPE 1
to reload recent video recordings from remote locales.
a
Indicates the camera's recording data on a time bar. If the camera's system clock has been changed to a
point in the past and more than one recording exists at the same point in time as a result, you will be able
to choose which segment to search from the segment menu on the upper right portion of the time table.
b
Right-click on the screen to display the pop-up menu. Click to enable or
disable each function.
•
Fisheye Dewarping:
This function is not supported.
•
Change Camera Title
: Used to change the camera's name.
Renaming the camera in Web Search mode does not affect the camera's name
on the remote system. If no name is entered for the camera, the name used at
the remote locale is shown on the screen.
•
Enable Audio
: If audio was recorded with the video, enabling this option plays audio upon playback.
•
Aspect Ratio
: Change the aspect ratio of the video displayed on the screen.
•
Anti-Aliasing Screen
: Removes stair step effect (blocks) that are caused when zooming a video to
improve overall quality of video output.
