Part 1 – Introduction
15
DC-D4236WRX, DC-D4236HRX
1
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Cable
Protect
connector
2
Assemble the cable rubber to the bottom cover.
3
Attach the enclosed desiccant in the bottom to
prevent moisture.
Desiccant
4
Use the screws, anchor provided with the camera to
secure the install body on a wall or a ceiling.
Use the provided guide pattern to check the
distance between the screws.
5
Connect external devices, the network cable, and
the power adapter.
6
Adjust the angle. For more information, refer to the
.
