Part 1 – Introduction
13
2
Connect external devices, the network cable, and
the power adapter.
3
Adjust the angle. For more information, refer to the
DC-D4213WRX
1
Push the network cable through the cable rubber,
using the protective connector provided.
Cable rubber
Cable
Protect
connector
2
Assemble the cable rubber to the bottom cover.
3
Use the screws, anchors provided with the camera to
secure the bottom cover on a wall or a ceiling.
Use the provided guide pattern to check the distance
between the screw holes if necessary.
4
Connect external devices, the network cable, and
the power adapter.
