Idis DC-D3233HRXL, Руководство по эксплуатации

Страница: 21 / 53

Part 1 - Remote Setup
21
• IR Cut Filter : IR Cut Filter blocks out the infrared
spectrum. You can ensure clear images at all times by
blocking out the infrared spectrum in high-lighting
conditions and allowing the infrared spectrum to pass
through in low-lighting conditions.
-
Nighttime Mode
/
Daytime Mode
: Disables or
enables the IR cut filter.
-
Auto
: Allow the system to enable/disable IR Cut
Filter automatically.
- Schedule : Sets up the IR cut filter schedule. The
IR cut filter is disabled during the date and time
scheduled as
Nighttime
and enabled during the
rest. Set up or release Nighttime by selecting On or
Off in the bottom and clicking or dragging the date
and time area in the table. Selecting On or Off and
clicking the
Select All/Clear All
button sets up or
releases Nighttime for all dates and time.
•
Switching Level:
Sets up the switching level between
daytime and nighttime modes. For example, if the
darkness level is set to
3 and the brightness level to
5
, the system switches to nighttime mode when in
lighting conditions of level 3 or below and to daytime
mode when in lighting conditions of level 5 or over. It
is recommended that you do not set up the darkness
level and brightness level identically; otherwise, this
function may not work properly. This functions only
when
B&W Mode or IR Cut Filter is set to Auto .
Miscellaneous
Configure
Miscellaneous
settings.
• Video Output : Select a video output signal format.
•
IR Strength:
Set the brightness of the IR LED. The
higher the value is set, the brighter it is.
•
Smart IR:
Prevent the object from being saturated by
IR light. Select On to always control saturation and
select Auto to control saturation only when the zone
is over-saturated.