Idis DC-D3214RX-N, Руководство по установке

Страница: 9 / 20

Part 1 – Introduction
9
DC-D3214X-N
6
7
2
9
9
3
4
5
2
3
4
1
5
8
DC-D3214RX-N
6
7
2
9
9
3
4
5
2
3
4
1
5
8
1
IR LED
2
Lens
3
Factory Reset Button
4
Wall/Ceiling Installation Hole
5
Bottom Cover
6
Network Port
7
Cable Access Hole
8
SD Memory Card Slot
9
Built-in Microphone
• IR LED
A sensor inside the system monitors lighting
levels and activates the IR LED during low-lighting
conditions.
DC-D3212RX-N / DC-D3214RX-N model only
• Lens
Features a fixed focus lens. You can adjust the
focus of the lens by turning the lens clockwise or
counterclockwise, and a focus fixation spring fixes the
lens position.
•
Factory Reset Button
Restores the camera's default factory settings. For
more information, refer to the
Factory Reset .
•
Wall/Ceiling Installation Hole
Used to screw the camera in place on a wall or a
ceiling.
•
Bottom Cover
Allows you to install the camera on a wall or a ceiling.
•
Network Port
Connect a network cable with an RJ-45 connector to
this port. If using a PoE switch, you can supply power
to the camera using an ethernet cable. For more
information on PoE switch use, refer to the switch
manufacturer's operation manual. You can configure,
manage, and upgrade this camera and monitor its
images from a remote computer over the network.
For more information on network connection setup,
refer to the
IDIS Discovery operation manual .