Idis DC-C4212RX, Быстрое руководство

Страница: 8 / 12

1. Turn the top cover counterclockwise.
2. Use the screws, anchors provided with the camera to secure the
body on a wall or a ceiling.
3. Connect the network cable like the following picture.
4. Attach the top cover to the bottom cover. Turn the top cover
clockwise to fasten it.
*If the network cable comes out as shown below, use a nipper to cut out the cable
access hole in the top cover.
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
• Install the camera in a shaded area. If the camera
is installed in direct sunlight, it may be affected
adversely.
7