Idis DC-B1203X, Быстрое руководство

Страница: 6 / 11

6
6
Attach the dome cover to the bottom cover. Use
the provided screws to secure the dome cover on
to the bottom cover.
7
Connect the power.
Check the wall or ceiling to see if it needs
to be reinforced. The camera may fall off if
the wall or ceiling is not strong enough to
support its weight.
Angle Adjustment
2
3
1
1
Lens Rotation
3
Horizontal Rotation
2
Vertical Rotation
DC-B1203X Model
CS-Mount Lens
C-Mount Lens
Manual Iris Lens
1
Remove the protective cover from the camera.
2
Turn the lens in clockwise direction and mount it
on the camera.
3
Rotate the lens' iris ring to open up the iris and
then adjust accordingly.
DC Type Auto Iris Lens
1
Solder on the lens connection line to the
connector socket, if necessary. For more
information about soldering on the lens control
wire, refer to the lens manufacturer's
operation
manual
.
2
Remove the protective cover from the camera.
3
Turn the lens in clockwise direction, mount it on
to the camera, and connect the auto iris jack to
the auto iris lens connector.
The auto iris jack must be at least 20cm
long in order to connect it to the camera.
CS-Mount Lens
1
Remove the protective cover from the camera.
2
Turn the lens in clockwise direction and mount it
on the camera.
C-Mount Lens
1
Remove the protective cover from the camera.
2
Turn the mount ring in clockwise direction and
mount the ring on to the camera.
3
Turn the C-mount lens in clockwise direction and
mount it on to the C-mount ring.
English