Part 1 - Remote Setup
21
•
Slow Shutter
: Activate
Slow Shutter
. The electronic
shutter’s speed will decrease to the specified level
under low-lighting conditions to allow more light in
and therefore produce brighter images.
•
IRIS
: Select the lens IRIS type. If a manual IRIS lens is
mounted on the camera, select Manual. If a DC-type
auto IRIS lens is mounted, select DC IRIS.
•
Shutter Speed Control
: Adjust Shutter Speed. This
option is available only when
Anti-Flicker
and
Slow
Shutter
are both set to
Off
.
-
Auto
: The system will assess the lighting conditions
and adjust the shutter speed automatically.
-
Manual
: Use the slider to select the desired
shutter speed. Select the most suitable minimum
and maximum shutter speeds for the lighting
conditions in the area where the camera is located.
With certain features, selecting
Auto
automatically
loads settings suitable for the camera's installation
environment.
Day & Night
Not applicable to DC-B1001 / DC-B1101
Configure
Day & Night
settings.
•
B&W Mode
: Display the images in greyscale for
greater clarity in low-lighting conditions. When
configuring
Event > Alarm In
, this feature will not
function if
Day & Night Mode
event action has been
configured.
-
On/Off
: Enable/disable B&W Mode.
-
Auto
: Allow the system to enable/disable B&W
Mode automatically.
-
Schedule
: Set up a B&W Mode schedule. B&W
Mode is enabled on days and times designated as
Nighttime
and disabled at all other times. Select
On
or
Off
at the bottom of the schedule table and
then click or drag on the dates and times to select/
unselect as
Nighttime
. Select
On
or
Off
and then
click
Select All/Clear All
to select/unselect all dates
and times as Nighttime.
With
DC-B1001 / DC-B1101
model,
B&W Mode
can
be configured from the Image Sensor screen. For
more information on Image Sensor settings, refer to
the
Image Sensor on page 19
.
