iDirect iQ Desktop+, Инструкция по установке, поддержке и обслуживанию

Страница: 49 / 52

Installation, Support, and Maintenance Guide 37
iQ Satellite Router
Appendix D iQ
Satellite Router Reset
The iQ Satellite Router has two types of reset functions: Level 0, and Level 1. Each
type has a different effect on the router. Contact the iDirect TAC center for more
information.
D.1 Level 0 Reset
Level 0 reset provides a basic reset function with the following features:
•
Initiated by:
• Router powering up
• Briefly pressing the reset button for 10 seconds or less. See Section 3.3, iQ
Satellite Router Rear Panel Description on page 10 for the reset button
location
• In the user interface, select the Administration > Software and Configuration >
Reboot Terminal
• Used to boot to a newly-loaded software image and configuration
• Recovery: initiate a Level 0 reset
D.2 Level 1 Reset
Level 1 reset provides a means of returning the router to factory default settings.
Level 1 reset features:
•
Initiated by: Pressing the reset button and keeping it pressed for more than 10 seconds,
see
Section 3.3, iQ Satellite Router Rear Panel Description on page 10 for the
reset button location
NOTE: Refer to the Terminal WUI User Guide for more information. It is good
practice to clear browser history, and turn off Web page caching, before accessing
the user interface.
NOTE: This reset must not be used unless there is an intent to reconfigure or
reload the software and options. There is no recovery once this reset occurs. New
options file, software, and configuration must be loaded using the Terminal WUI
once this reset has been initiated.