![background image](http://html1.mh-extra.com/html/idirect/iq-desktop/iq-desktop_installation-support-and-maintenance-manual_617980022.webp)
10
Installation, Support, and Maintenance Guide
iQ Satellite Router
iQ Satellite Router Rear Panel Description
3.3 iQ Satellite Router Rear Panel
Description
The iQ Satellite Router rear panel is shown in
Figure
3-2. Rear Panel Description
3.4 Detecting a Tx IFL Over-current Condition
displays the LED status of the iQ when the TX IFL port detects a over-
current.
Table
3-2. iQ Satellite Router Rear Panel Connector Descriptions
Callout
Label
Interface Definition and Connector Type
6
TX
L-Band Transmit signal to Block Up Converter (BUC)
capable of 10 MHz or 50 MHz Reference; 75 Ohm, F-
Type
7
Reset
iQ internal reset button
8
RX
L-Band Receive signal from Low Noise Block Down
Converter (LNB); 75 Ohm, F-Type
9
UART (Console)
iQ console port, RJ-45
10
ETH1
Ethernet Communications Port, RJ-45
10/100/1000 Ethernet ports, 802.1q VLAN
11
ETH2
Ethernet Communications Port, RJ-45
10/100/1000 Ethernet ports, 802.1q VLAN
12
+24V DC Power
Supply
3.75A
DC Power Inlet
Содержание iQ Desktop+
