iDirect iQ Desktop+, Инструкция по установке, поддержке и обслуживанию

Страница: 42 / 52

30 Installation, Support, and Maintenance Guide
iQ Satellite Router
Ethernet Port Pinouts
B.2 Ethernet Port Pinouts
The iQ Satellite Router is capable of Universal Cable Recognition or auto-MIDX (auto-
sensing) and will connect to a PC with the straight through Ethernet cable for using the user
interface.
ETH 2 port is the recommended port to connect the Ethernet cable to the Ethernet port on
the PC running the user interface.
Either crossover or straight through cables may be used with the iQ Satellite Router.
It is not necessary for the PC to auto-sense. Details of the iQ Satellite Router
LAN/Ethernet port pinouts are described in
Section B.2.1 and Section B.2.2 defines straight
through and crossover cables.
B.2.1 Ethernet Port Pinouts
Table B-2 lists the pinouts for the Ethernet ports (labeled ETH-1, ETH-2) of the iQ
Satellite Router and the pinout order is shown in Figure B-6 .
Figure B-6. RJ-45 Cable Connectors: Receptacle and Plug
The iQ Satellite Router supports 1 Gbps Ethernet IEEE802.3ab; 100 Mbps IEEE802.3u;
and 10 Mbps Ethernet 802.3i.
Table B-2. Ethernet Port Pinouts
RJ-45 Pin Description
1 MDI0+
2 MDI0-
3 MDI1+
4 MDI2+
5 MDI2-
6 MDI1-
7 MDI3+
8 MDI3-