iDirect iNFINITI 3000, Руководство по установке и пусконаладке

Страница: 55 / 72

51
iDirect iNFINITI series Installation and Commissioning Guide, Release 7.0
13.2 Set the Initial Tx Power for a Remote
Determine and set the initial transmit power as follows:
NOTE
You must determine the initial transmit power setting under clear
sky conditions.
WARNING
Following this procedure to determine the initial transmit power for
a mesh remote while the remote is in a rain fade can result in a
power setting that is too high. This can overdrive the power on the
satellite.
1. In iMonitor, right-click the remote in the network tree and select
Probe
from the
menu.
2. In the
Remote Power
area of the screen, click the
Change
button.
3. In the
Change Remote Tx Power
dialog box:
a.
Enter -25 in
New Tx Power
and click
Set
. (You can also base this initial
setting on another remote in the network with similar antenna, BUC and
geographic location.)
b. Increase the transmit power by increments of 3 dB until the remote
acquires into the network.