iDirect evolution x5, Руководство по установке

Страница: 26 / 68

12 iDirect Evolution X5 Satellite Router Installation and Safety Manual
RF Specifications
The Evolution X5 Satellite Router typical BUC/LNB power consumption is defined in Table 5 .
Note: The typical power consumption ratings that follow are based on the coax
cables that are specified in the section on “Preparing the Coax Cables” on
page 22 .
3.3 RF Specifications
The Evolution X5 Satellite Router RF specifications are presented in Table 6 .
Table 5. Typical BUC/LNB Power Consumption
Cable
Length
Mode Typical Power Consumption (W): IDU, BUC, PLL/DRO LNB, Cable IFL
1W Ku 2W Ku 4W KU 2W C 5W C
NJT5034F NJT8301UF NJT5037F NJT8302UF NJT5017F NJT5207F NJT5667 NJT5669
50 ft.
RG-6 Normal 31 29 43 32 70 52 47 62
Sleep 20 18 20 18 21 19 19 22
250 ft.
RG-6 Normal 32 30 44 34 87
a
a. The Evolution X5 Satellite Router must be operating at less than 50 ° C when ODU power consumption
exceeds 70W. See Table 3 on page 10 for more detail.
57 51 69
Sleep 20 18 20 18 21 20 19 19
Table 6. RF Specifications
Category Description
Frequency Range
Transmit:
Receive:
950-1700 MHz
950-2150 MHz
Frequency Tuning Step Size
Transmit:
Receive:
38 Hz
Sub-Hertz with Demodulator
RF Power Range
Transmit:
Receive:
-35 dBm to +7 dBm
Single Carrier Input Power: -65 dBm to -15 dBm
Composite Wideband Input Power: -5 dBm (maximum)
RF Power Adjustability
Transmit:
Receive:
0.5 dB Nominal Step Size
Under AGC for all valid Rx input power range