iDirect Evolution X1, Руководство по установке

Страница: 83 / 130

iDirect Satellite Router Installation and Commissioning Guide 67
iDX Release 3.3
12 Over the Air Download
This chapter explains how to download the software package and/or remote-side options file
to a Satellite Router from the NMS when a Downstream Template has been loaded or the
downstream configuration has been manually configured using Web iSite.
Note: Over the air download is only available for X1 Satellite Routers already running
iDX Release 3.2 or later. The software version is displayed on the Web iSite
dashboard. See
Figure 29 on page 48 .
This chapter includes the following sections:
•
“Software Package and Options Push” on page 67
• “Options File Only Push” on page 69
• “Verify the Download” on page 69
12.1 Software Package and Options Push
This section explains how to work with the Network Operator to push both the software
package and remote-side options file to an Evolution X1, X7 or e150 Satellite Router. To push
only the options file, follow the procedure in
“Options File Only Push” on page 69 .
The procedure assumes that:
•
The Downstream Template has been loaded on the Satellite Router or the downstream
configuration has been manually configured using Web iSite
• The antenna has been pointed and peaked
• The Satellite Router is receiving the downstream carrier
Because the antenna is peaked and the Satellite Router is receiving the downstream
broadcast, the Network Operator is able to multicast the software package to the Satellite
Router over-the-air and then push the options file using UDP.
To Push the Software Package and Options File:
1. Confirm that the Tx output of the Satellite Router is not connected to the voltmeter or
the BUC.
2. Confirm that the Satellite Router was restarted after antenna peaking.
3. Confirm that the Satellite Router is locked to the downstream carrier.