ImageVue CR20
Digital Imaging System
Quick Reference Guide
Starting and stopping the system
To start the system:
1. To turn on the scanner, press the
Standby
switch
on the scanner operation panel.
The Ready lamp illuminates.
2. Turn on the computer; the software starts automatically.
To shut down the system:
1. Tap
in the upper right corner of the software window, and then select
Shut Down.
2. Tap
OK
to confirm. Both the computer and the scanner shut down.
Requesting an image capture
From the Cornerstone
*
software:
1. Set up invoice items to initiate the Image Request special action.
OR
From the Patient Clipboard*, open the patient record, right-click the patient’s name in the
Patient List
, and then
select
Imaging > Image Request
.
Requests are listed by patient in the ImageVue* CR20 RIS window.
2. Select the patient in the ImageVue CR20 RIS window, and then tap
.
3. In the Study window, tap
to display the Shot Selection window. See “Capturing the images.”
From a non-Cornerstone practice management system:
1. Use the modality worklist feature to send the image request to the ImageVue CR20 software.
2. Follow steps 2–3 in the previous section.
From a standalone ImageVue CR20 system:
1. In the RIS window, tap
to display the Patient Information window.
2. Enter a new patient record, and then tap
. See “Capturing the images.”
