Idex Trebor MAGNUM 620R Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 28

Idex Trebor MAGNUM 620R Скачать руководство пользователя страница 22

PAGE 22

MAGNUM 620R PUMP OPERATION / MAINTENANCE MANUAL

ATTENTION:

Threads should be snug. Do not over tighten.

•

Thread muffler assembly into head using 3/4” pin tool.

4.8.b Pump Assembly

NOTE:

Check sleeves that fit too tightly for easy installation should be placed in

a freezer prior to assembly to assist insertion. Body must be upside down with
check port extending over a table edge so that parts remain assembled during
insertion of sleeves. (See Figure 4-5.)

Figure 4-5

•

Insert suction sleeve, check ball and O-ring carefully into check bore.

NOTE:

The Suction Sleeves have a shoulder diameter larger than their body

diameter. Additionally the Suction Sleeves when compared to the Discharge
Sleeves have a thicker top region which acts as a robust contact point for the O-
rings.

•

Repeat insertion process with the discharge sleeve, check ball and O-ring.

•

Repeat process for second check bore.

•

Replace seals and tighten check bore caps to 45in-lbs.

•

Install seal and damper plug using 3/4” pin tool, torque to 45in-lbs.

«
...
20
21
22
23
24
...
»

Содержание Trebor MAGNUM 620R





























Отзывы:

Нет отзывов