Strainers
13
Get the latest PDF manual:
https://www.lcmeter.com/resources/technical/manuals
Mobile/online version of this manual:
https://www.lcmeter.com/manuals
6. Place the cover (8) on top of the strainer housing.
7. Insert the 12 or 16 screws (9) into the cover holes (8).
Attach the flat washer (10) and nuts (11) to the screws (9)
from below. Evenly tighten all nuts and screws. See the
Torque Chart
below.
WARNING
Before refilling or re-pressurizing your meter/strainer assembly, all seal gaskets and
bolts must be in place and fully tightened to prevent leakage of product out of the
system. See Torque Chart below. Failure to follow this procedure may result in a
hazardous condition and possible serious injury or death.
