A–1
APPENDIX A.
TORQUE SPECIFICATION
A.1
Hale General Torque Recommendations
When a specific torque value is NOT specified in a procedure, Hale recommends following the
recommendations in Table 85. Always utilize a minimum of Grade 8 (SAE) or class 10.9 (metric)
for all flange and/or drive line mounting fasteners.
Unless otherwise specified, 1/4-in diameter and larger steel screws are to be SAE grade 5 steel.
Chemical and mechanical properties are to conform to grade 5 per SAE J429.
Unless otherwise specified, steel screws smaller than 1/4-in diameter are to be SAE grade 2
steel. Chemical and mechanical properties are to conform to grade 2 per SAE J429.
Some threaded fasteners used at Hale are treated with a 360° coating of nylon or similar mate-
rial to provide sealing and self-locking properties. Do NOT reuse fasteners with self-locking prop-
erties. This coating conforms to MIL-F-18240, MIL-N-25207, and Industrial Fastener Institute
IFI 124 and IFI 524. The torque value listed in the 360° nylon lock column of the table is added
to the listed torque value for that bolt size. For example, a 5/8–11 SAE grade 5 bolt treated with
360° nylon lock would have a maximum torque value of 150 + 10 = 160 ft-lbs.
Table 85. Hale General Torque Recommendations
Bolt
Size
Carbon Steel
SS
AL
2024-T4
Brass
Silicon
Bronze
Nylon
Lock
GRD 2 GRD 5 GRD 8 18-8 316
Values are stated in Inch- Pounds
2-56
-
-
-
2.5
2.6
1.4
2
2.3
-
2-64
-
-
-
3
3.2
1.7
2.5
2.8
-
3-48
-
-
-
3.9
4
2.1
3.2
3.6
-
3-56
-
-
-
4.4
4.6
2.4
3.6
4.1
-
4-40
5
8
12
5.2
5.5
2.9
4.3
4.8
-
4-48
6
9
13
6.6
6.9
3.6
5.4
6.1
-
5-40
8
12
18
7.7
8.1
4.2
6.3
7.1
-
5-44
9
14
19
9.4
9.8
5.1
7.7
8.7
-
6-32
10
16
23
9.6 10.1
5.3
7.9
8.9
-
6-40
12
18
25
12.1 12.7
6.6
9.9
11.2
-
8-32
19
30
41
19.8 20.7
10.8
16.2
18.4
-
8-36
20
31
43
22
23
12
18
20.4
-
Содержание Hale Sam
