Idex Hale Sam, Руководство по эксплуатации, установке и обслуживанию

Страница: 86 / 141

70
E. SAM Control Center continues to display OPENING until master intake valve posi-
tion sensor indicates master intake valve is fully open and sequence is complete.
See Figure 76.
Figure 76. Activating A Hydrant Intake Sequence (Complete)
SAM closes tank-to-pump valve and fills the water tank as the water supply permits. All this can
be done while flowing water or before the discharge is opened.
6.3.1.2.1
Bypass Venting
If desired (or as a bypass, when HYDRANT DETECTION SENSOR LOST. USE OVERRIDE is dis-
played), the venting time may be reduced or bypassed as follows.
A.
On SAM Control Center, while VENTING is displayed for an intake, touch VENTING
button. (See Figure 73, page 68.)
B. On popup window, touch YES button. (See Figure 77.)
Figure 77. Active Force Intake X Open Popup