Ideon Audio Absolute, Инструкция пользователя, Страница: 4 / 12

4
© Ideon Audio, April 2018 – absolute manual r. 1.2
Due to continuous research, Ideon Audio reserves the right to change specifications without notice.
Connecting us with the musical event
Setting up the absolute
Connecting the absolute is straightforward.
The back panel has three inputs, two are
COAX (RCA & BNC) for SPdIF and one is USB.
The absolute is a fully balanced device
throughout and output is offered in
balanced XLR or single-ended. The device
has its own output control functionality; it
is therefore possible to drive your power
amplifier(s) directly from the absolute
using this functionality. If you do not have
any analogue sources, direct driving your
amplification may be a way to simplify
your system. As the Absolute is a balanced
design, we recommend you use the
balanced output to direct drive your
amplification as it is less likely to transmit
noise. From a sonic point of view, however, it
is a matter of taste!
Important
On power up the absolute defaults to -0 dB FS volume output. This means that the output is FULL
VOLUME. IF you are playing direct (without pre-amp) and have selected variable volume output
(from the General settings menu as explained in the following sections), ALWAYS turn the output
volume to the lowest level – i.e. the highest “- dB” number – before switching on your amplification.
Cutting edge design & components