Product specifications, parameters, functions of the device can change without notice!
27
IDENTIVISION IP NVR INSTALLATION GUIDE
6.11
PTZ Special functions
：
6.11.1 Preset
Set a location for the preset, calls the preset points, PTZ automatically turns to the setting position
Preset option
Set a location for the preset, procedure is as follows:
Step 1.
click the Direction button will turn into preset position , click the Settings button to enter
Step 2.
click the Preset button , then write the preset points in the input blank,
20. picture
PTZ config
Step 3.
click Settings button, return the Complete setup, that is the preset points and preset position
corresponds.
Clear Preset
：
Input preset points, click Remove button, remove the preset
Preset Point Calls
Step 1.
click Page Shift button
Step 2.
enter PTZ control interface
Step 3.
In the input blank, write the preset points, then click Preset button
Step 4.
PTZ turn to the corresponding preset point.
21. picture
PTZ control
6.11.2 Cruise between Points
Multiple preset points connected cruise lines, call cruise between points, the PTZ run around on the line
