Version Mai 2023
21
Both brakes must be locked to get on or off the wheelchair.
Unfold the main structure with your hands, pressing on the 2 side rails of the seat (do not try to open or separate
the 2 armrests, they will not resist and will break).
Install the swivel castors at the front. Rotate the main frame to make it easier to fit the wheels. Fit the 2 front
bearings, the fork through the tube and use the spanner to tighten the castors.
Seat rails
Back support
Caution: Do not try to catch objects behind you. The
wheelchair could tip over.
Get as close as possible to the object with the wheelchair,
without changing your sitting position. Move the front
castors forward so that the 2 wheel axles are as far apart as
possible. Tilt back as far as your arm length will allow
without changing your sitting position.
Position and tilt at the rear
