identités 875026, Руководство по безопасности

Страница: 7 / 13

- 7 -
9 10 11
5.
Auxiliary wheel mounting: Install the auxiliary wheel and fixed it with a pin. (Pic 12, 13)
（
12
） （
13
）
6
.
Controller Installation:The controller is installed on the right by default (if you need to adjust the
installation position, you need to remove the fixing screws of the fixing bracket first, and then
change to the left to install). Insert the control wire connector on the controller and the
corresponding connector on the control box and tighten the connecting nut (Pic 3-1).
3-1
When connecting the joints, pay attention to the matching of the slots. The black arrows on the left
and right connectors should be corresponding. Do not force the insertion to prevent damage to the
connector (Pic 3-2).