GRIP HANDLE
REF 815015
USER MANUAL
Description:
This handle should only be used as a balance aid. It cannot support your total weight and is not
designed to support such a pull.
Before each use, check the adhesion of the two suction cups by pulling slightly without support. If one
or both suction cups are not adhering to the wall, you must remove and reposition them. Check the
tightness of the suction cups every time you use them.
Note: For maximum safety this product must be used correctly. Improper use may cause the handle
to become unstable or detached from its base.
Instructions for use:
Clean and moisten the surface before installing the handle. The levers must be lifted. Keep the
suction cups fully depressed so that they cover the entire surface. Lower the levers to secure the
handle. Check the grip, repeat if necessary. To remove the handle, raise the levers and remove the
handle while pulling the suction cup tab slightly. Check the grip before each use. If necessary, clean
the suction cups and reinstall the handle following the previous instructions. Disassemble and
reassemble every week.
The suction cups must be placed on a smooth, flat, clean and non-porous surface. Placing the suction
cups on cracks or joints between tiles prevents the handle from being fixed properly (Picture 2).
Caution: apply the product to a smooth tiled surface, ensuring that the surface can withstand the
system (do not use on poorly bonded tiles, textured, porous or rough tiles, painted or papered
surfaces).
