iPOINT X – Hardware User Manual | 18.06.2020
Copyright © 2020 IDENTEC SOLUTIONS. All rights reserved.
19
4.2 Mounting Options
The mounting plate can be attached to a wall, pole mount bracket, extension bracket or DIN rail. There are 4 fixing
holes for attaching the relevant bracket or screwing to a wall.
For mounting with a pole mount bracket or extension bracket, please see relevant Installation guides provided with
the kits.
For Direct wall mounting, using the mounting plate only, 4x countersunk screws are required with a maximum
diameter of 5mm or M5 screws. Length and type shall be chosen depending on wall material.
4x countersunk screws
Choose screw type and length depending on wall
material
Maximum diameter of 5mm
Screw plate securely to the wall using all 4 screws
the iPOINT X device can then be clipped onto the
plate and secured with the securing screw
Warning
: Don’t screw the mounting plate directly to a metal surface that extends the size of the whole device. This
will have an influence on the UHF and LF performance. If a metal fixing surface is required, please use the extension
bracket as a standoff.
Wall
