IDENTEC SOLUTIONS IDS1000, Руководство пользователя по оборудованию

Страница: 4 / 17

Radio Frequency (RF) Exposure Compliance of Radiocommunication
portable apparatus
This device complies with FCC and ISED Canada RF radiation exposure limits set forth for general population
(uncontrolled exposure). This device must not be collocated or operating in conjunction with any other antenna or
transmitter.
Conformité à l’exposition aux champs RF des équipements radio portables
Cet appareil est conforme aux limites FCC et ISDE Canada concernant l'exposition aux rayonnements RF établies
pour le grand public. (Environnement non-contrôlé)
Cet émetteur ne doit pas être co-situé ou fonctionner conjointement avec une autre antenne ou un autre émetteur.
WARNING
-
This product should be installed by personnel trained in installation of
equipment in industrial environments and meet the representative country’s
National Electrical Code.
Electrostatic Discharge
This product contains components that are sensitive to electrostatic discharges. Please observe
the special instructions for their protection. Incorrect handling can damage the unit and cause
the invalidation of the warranty.
Minimum safety precautions against electrostatic discharge:
 Establish earth contact before you touch the unit. (For example, touch the earthing screw on the unit.) Best
practice is to use an antistatic ribbon and earth yourself permanently for the time you handle the unit.
 Avoid unnecessary contact with the unit connectors and assemblies inside the unit.
 Do not open the unit.
 Use antistatic tools for the setting of the unit. (Warning: Do not touch life-threatening voltages with these tools).
 Do not store unit and components without protective packaging.
 Remove unit and components from the packaging only prior to installation.
These notes are not sufficient to guarantee complete protection from electrostatic discharges! We
recommend the use of suitable protective equipment.
IDENTEC SOLUTIONS does not accept the return of products where the regulations concerning the ESD
precautions and protective packaging materials were not followed.