8
CAUTION
•
Only use top-quality batteries. Cheap batteries could leak and damage the device as a
result.
•
If the batteries leak, remove them with a cloth and dispose of them accordingly. Ensure that
leaking battery acid does not come into contact with skin and eyes. If you do get battery
acid in your eyes, flush them thoroughly with lots of water and consult a physician
immediately! If battery acid comes into contact with your skin, wash the affected area with
lots of water and soap.
•
If the device is not to be used for a longer period of time, then the batteries should be
removed, as the device could become damaged should they leak. If the device functions
weaken, replace all batteries.
•
If the performance of the batteries weakens, replace them as soon as possible.
•
Batteries must not be recharged or activated with another means, dismantled, thrown into
fire or short-circuited.
6. SENSOR
1. Pull the protective film off of the sensor and adhere it to a suitable location outdoors.
7. CONTROL ELEMENTS
7.1 FRONT OF THE THERMOMETER
BUTTON FUNCTION:
MODE (C)
Simple operation:
Switch between the time and date display.
Long confirmation necessary (press for longer than 2 seconds:
Mode for setting the time and date.
Press the SET button (E) to select 24 or 12 hour mode.
Confirm the setting with the MODE button.
Press the SET button (E) to reset the seconds display to 00.
Confirm the seconds setting with the MODE button.
Press the SET button (E) to increase the hour.
Confirm the hour setting with the MODE button.
Press the SET button (E) to increase the minutes.
Confirm the minutes setting with the MODE button.
Press the SET button (E) to increase the year.
Confirm the year setting with the MODE button.
Press the SET button (E) to increase the month.
Confirm the month setting with the MODE button.
Press the SET button (E) to increase the day of the week.
Confirm the day setting with the MODE button.
You will then leave the set mode.
MIN/MAX (B)
Press once to display the maximum temperature measured.
Press twice to display the minimum temperature measured.
Press three times to return to the current temperature.
The thermometer automatically switches from the minimum or maximum
temperature to the current temperature display after 8 seconds.
In order to delete the minimum and maximum temperatures measured, press
MIN/MAX (B) longer than 2 seconds while the corresponding value is being
displayed.
