6
t
SETTING THE HOURLY ALARM
Press the
SET
button (7). The time blinks and “AL” is displayed in the digital display (5).
Press the
MODE
button (8) until the bell symbol is displayed.
To confirm the selection, press the
SET
button (7) until the time is displayed again.
Now the scale will beep briefly at every full hour.
When you select the bell symbol and the alarm symbol together, then the scale beeps
at every full hour and you can set a separate alarm time as well (see
SETTING THE
ALARM
)
SETTING THE TIME
Press the
SET
button (7). The hour blinks.
Press the
MODE
button (8) to set the hour.
Press the
SET
button (7). The minutes blink.
Press the
MODE
button (8) to set the minutes.
To confirm the selection, press the
SET
button (7) until the time is displayed again.
SETTING THE DATE
Press the
SET
button (7) four times until the month is displayed.
Press the
MODE
button (8) to set the month.
Press the
SET
button (7). The day is displayed.
Press the
MODE
button (8) to set the day.
To confirm the selection, press the
SET
button (7) until the time is displayed again.
TECHNICAL DATA
Power supply:
4 x AAA batteries
Environmental protection
Electrical and electronic devices should not be disposed of with
household garbage. If you want to dispose of this device,
contact local authorities about the correct method of waste
disposal.
If the end of the operating life has been reached, disable the appliance.
This device is suitable for private use only, and may not be used for
commercial purposes.
Imported by:
Dirk Rossmann GmbH
Isernhägener Straße 16
30938 Burgwedel
