13
t
• To switch on the device, turn the rotary switch to
1
position.
0
= off
1
= slow
2
= fast
P
= immediate pulse operation
• To switch off the device, turn the rotary switch to
0
position.
• After use, disconnect the plug from the power outlet.
• Wait for the blade unit (3) to come to a complete stop. Disconnect the mixing bottle (7) includ-
ing the blade unit from the engine unit (4) by turning former one a short distance anticlockwise.
• Place the bottle on a flat surface with the blade unit facing up. If foodstuff is stuck inside the
blade unit, shake or tap the bottle until the residue becomes loose.
• Remove the blade unit and close the mixing bottle with its lid (6).
Mixing cup (2)
• Screw the blade unit (3) onto the bottom of the mixing cup. Make sure both parts are securely
attached to each other.
• Fill the mixing cup with the ingredients to be mixed. Observe the MAX level indicator and do
not overfill the mixing cup.
• Close the mixing cup with its lid (1). When doing so, observe the recesses in the lid and turn it
clockwise until it locks into place.
• Make sure the rotary switch (5) is at
0
position.
• Connect the power plug to a suitable power outlet.
• Place the mixing cup including the blade unit onto the engine unit (4). When doing so, observe
the recesses in the engine unit.
• Apply slight pressure from the top and turn the mixing cup clockwise until it locks into place.
• Make sure the mixing cup and the engine unit are securely connected with each other.
• To switch the device on, turn the rotary switch to
1
,
2
or
P
position.
• To switch off the device, turn the rotary switch to
0
position.
• After use, disconnect the plug from the power outlet.
• Wait for the blade unit (3) to come to a complete stop before removing the mixing cup from the
engine unit (4) by a short anticlockwise rotation.
• Place the mixing cup on a flat surface.
• Turn the lid of the mixing cup anticlockwise and remove it.
Note:
Do not operate the device longer than 2 minutes at a time in order to prevent the device
from overheating. Let the device cool down for approx. one minute before operating it again.
Overheating protection
If the device gets too hot, it will switch off automatically. In such a case, disconnect the power
plug from the wall socket and let the mixer cool down.
P160054_R4G_BL-05E_MiniBlenderSmoothieMaker_DE_GB_201711.indd 13
11/7/16 11:22 AM
