IDEC WindO/I-NV4, Руководство пользователя

Страница: 951 / 1738

WindO/I-NV4 User’s Manual
12-27
4 Print Command
12
Co
m
m
an
ds
4.3 Properties of Print Command Dialog Box
This section describes items and buttons in the Properties dialog box.
●
General Tab
■ Part Name
Enter a name for the part. The maximum number is 20 characters.
■ Output to
Select where to direct the screenshot to.
■ Action Mode
Select the action to perform when the trigger condition is satisfied from the following. This option is displayed only
when Printer is selected in Output to .
*1 HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F only
*2 USB flash drive inserted in USB1 for HG2J-7U, SD memory card for HG5G/4G/3G/2G-V, HG4G/3G and HG2G-5F,
USB flash drive for HG2G-5T and HG1G/1P
Printer
*1
:
Outputs the screenshot to the printer connected to the MICRO/I.
Print Time Stamp:
Adds the date and time of printing to the screenshot before
sending it to the printer.
The date and time format depends on the language selected in
Language . Language is available on the Project Details tab of
the Project Settings dialog box.
The display formats are shown below:
• Japanese: YYYY/MM/DD hh:mm
• English: MM/DD/YYYY hh:mm
YYYY: year, MM: month, DD: day, hh: hour, mm: minute
External Memory Device
*2
: Outputs the screenshot as a file to the external memory device inserted in the MICRO/I.
Files are output as follows:
File format File name File size
JPEG
CAP***.JPG (***: date and time when file was output)
Example: A file created at 18:50:25 on June 30, 2011 will
be named “CAP110630_185025.JPG”.
Depends on image
being displayed.
• For details about printers, refer to Chapter 32 “Printer” on page 32-1.
• For details about external memory devices, refer to Chapter 31 “External Memory Devices” on page 31-1.
Print Screen: Outputs a screenshot of the current screen to the printer or the external memory device.
Cancel Printing
*1
: Cancels printout to the printer.