IDEC WindO/I-NV4, Руководство пользователя

Страница: 837 / 1738

WindO/I-NV4 User’s Manual
10-209
11 Calendar
10
Da
ta
D
isp
la
ys
■ Day of the Week Settings
Configures the content to be displayed as the day of the week. These options can only be configured when Clock or
Clock & Alarm is selected for Calendar Type and Date & Day of the Week & Time , Date & Day of the Week ,
Time & Date & Day of the Week , Time & Day of the Week , Day of the Week & Time or Day of the Week is
selected for Clock Type .
●
Alarm Tab
These options can only be configured when Alarm or Clock & Alarm is selected for Calendar Type on the
General tab.
■ Alarm Time
Selects the type of data for the alarm time.
Type: Selects the string to indicate the day of the week from the following:
(
日
), (
月
), ..., (
土
), Sun., Mon., ..., Sat., Sunday, Monday, ..., Saturday,
星期日
,
星期一
, ...,
星期六
, Customize
When
Customize
is selected, configures the string to indicate the day of the week. The maximum
number is 10 characters.
(Alarm conditions)
Value: Specifies the alarm time as values and the day of the week.
Year:
Enter the year (0 to 99).
Month: Enter the month (1 to 12).
Day: Enter the day (1 to 31).
Day of the Week: Select the day of the week.
Hour:
Enter the hour (0 to 23).
Minute: Enter the minute (0 to 59).
Second: Enter the second (0 to 59).
Device Address: Configures the alarm time as values of word devices.
It handles as a value whose data type is BCD4(B). Configures the year, month, day, hour, minute, and
second values in the same range as Value . Specifies the day of the week with the following values.
0: Sunday, 1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday, 6: Saturday
Click
to display the Tag Editor. For the device address configuration procedure, refer to Chapter
2 “5.1 Device Address Settings” on page 2-70.
If the data of the alarm time is invalid, 1 is written to System Area 2 Processing error bit (address
2, bit 5), and an error message is displayed. For details, refer to Chapter 4 “Processing error” on
page 4-32 and Chapter 36 “Processing error” on page 36-3.
An error occurs in the following states:
• Year , Month , Day , Hour , Minute or Second are set to values outside the range of Value .
• A value outside the range of BCD4(B) is entered.