IDEC WB1F Support Tool, Руководство пользователя

Страница: 5 / 39

2 Operational Check 3 Screen and Menu 4 Appendix 1 Overview
iv
Introduction
Version up information
New function has been added to WB1F. Please check Software Version and Database Version before using. Method for ver-
sion acquisition refer to
F
[Version information] on page 3-13 of [3. 2. 5 Help].
In addition, the initial release version of software is “1.0.0.0 (001.000.00)” and the initial release version of database is “1.0.0.0
(001.000.00)”.
Details
WB1F Support Tool Version
Software Version Database Version
WB1F type Firmware A-002.010.00 Correspondence 001.010.00 001.010.00
WB1F type Firmware A-002.020.00 Correspondence
001.020.00 001.020.00 Speedup of upload and download of a setting value
Speedup of update of firmware
WB1F type Firmware A-002.030.00 Correspondence
001.030.00 001.030.00
Addition of Communication speed 600bps
WB1F type Firmware A-002.040.00 Correspondence
001.040.00 001.040.00
WB1F type Firmware A-002.050.00 Correspondence 001.050.00 001.050.00
WB1F type Firmware A-002.060.00 Correspondence 001.060.00 001.060.00
General terms, abbreviations, and terminology used in this manual
The general terms, abbreviations, and terminology used in this manual are as follows.
Item Definition
Communication unit Refers to the Communication Unit WB9Z-CU100 available for purchase separately.
Control characters
ASCII codes 00H - 1FH and 7FH. In this manual, they are expressed using . For details,
refer to
F
[4. 2 ASCII Code Table] on page 4-4 .
Our website www.idec.com/japan/
Graphic Symbol Glossary
This manual uses the following graphic symbols to simplify explanations:
Notes
Graphic sym-
bols
Meaning
Notes information that should be carefully noted. Failure to operate the product in accordance with
the information provided may affect the performance of the main unit as well as any connected pe-
ripheral devices.
Denotes additional information that may prove useful for using a given function.