background image

i

Introduction

This document is the user’s manual for the WB1F support tool, a support tool for the WB1F fix linear CCD scanner. The 
WB1F support tool is provided “as- is” free of charge, whether express or implied, without warranty of any kind, including, 
but not limited to, merchantability, compatibility for specific purposes, non-defect, and non-infringement of third party 
rights. You may operate this WB1F support tool only under your responsibility and IDEC Corporation (“IDEC”) will not be 
responsible for any damage whatsoever, including but not limited to, consequential damage, indirect damage, special 
damage, incidental damage, loss of profit, business interruptions, loss of business information, and other monetary dam-
ages that occur from the use or the inability to use this WB1F support tool, even if IDEC is informed of the possibility of 
such damages.

Before using the WB1F support tool, please read this manual and understand the specifications of the software so that it 
can be used correctly.

Attention

 

z

IDEC Corporation holds all rights related to this manual. Unauthorized duplication, reproduction, sales, transfers, or leas-
ing without the express consent of IDEC is prohibited.

 

z

The content of this manual may change without prior notification.

 

z

We have taken all possible measures with the content of this product, but if you notice any portions that are unclear, or 
any mistakes, please contact the dealer where purchased or an IDEC sales representative.

Содержание WB1F Support Tool








































Отзывы: